Settings Menu - MZ electronic EVVA-M Instructions D'utilisation

Settings menu

By pressing (ON) key for 3 seconds it's
possible to access the instrument setting
menu. The following page will appear on the
display:
Use the (DOWN) and
move around the menu options.
Once you are positioned on the item to be modified press the
choice.
Use the (DOWN) or
Once one is positioned on the parameter press the
According to the type of parameter, using the
reduce/increase the value of the same or disable/enable the function.
Once the modification has been performed, press the
Using the (DOWN) key go to the Exit option and press the
the setting menu. The same procedure must be used to return to the main page.
Functions menu
Use the (DOWN) or
Load Default
This function allows the User to revert to the
original factory default settings, thus erasing
all settings memorised.
This command must only be used in the
event of programming errors.
EVVA-M
(UP) keys to
(UP) keys to move from one parameter to another.
Funzioni
Load Default
Sensor Reset
Exit
(UP) key to move around the parameters.
Select with
Confirm with
Menu
Functions Allarmi
Settings
Language
Sensor address
Tests
(ON) key to confirm your
(ON) key to enable modification.
(DOWN) and (UP) keys it is possible to
(ON) key to confirm.
(ON) key again to return to
NO
YES
= Yes = No
26
English
Rev. 01 – 2019