MZ electronic EVVA-M Instructions D'utilisation page 20

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

For instructions on making electrical connections, see the attached diagram. The wires must
have a minimum cross section size of 1.5 mm².
Install a 4 A (ampere) fast safety fuse on the + wire of the battery. Do not use the voltage
generated by the engine battery set to provide power.
The instrument complies with EMC standards (EN55022) and must be positioned at a distance
of:
30 cm (~1 Ft) from the compass;
50 cm (~1.5 Ft) from radio equipment;
2 metres (~6.5 Ft) from radio transmitter equipment;
2 metres (~6.5 Ft) from the radar beam.
EVVA-M
20
English
Rev. 01 – 2019

Publicité

Table des Matières
loading

Table des Matières