Chain Counter Setting Menu - MZ electronic EV030-Radio Instructions D'utilisation

Chain counter setting menu

Hold down the
access the instrument setting menu. The
following page will appear on the display:
Use the (DOWN) and
move around the menu options.
Once you are positioned on the item to be modified press the
choice.
Use the (DOWN) or
Once one is positioned on the parameter press the
According to the type of parameter, using the
reduce/increase the value of the same or disable/enable the function.
Once the modification has been performed, press the
Using the (DOWN) key go to the Exit option and press the
the setting menu. The same procedure must be used to return to the main page.
Measurement menu
Use the (DOWN) or
Reset Measurement
Resets the chain measurement value (0.0).
Units
Selects the unit of measurement:
Feet/ inches
Metres / centimetres
EV030-Radio
(ON) key for 3 seconds to
(UP) keys to
(UP) keys to move from one parameter to another.
(UP) key to move around the parameters.
Menu
M e a s u r e
A l a r m s & F u n c t i o n
S e t t i n g s
L a n g u a g e
S e n s o r C a l i b r a t i o n
Menu
L a n g u a g e
S e n s o r C a l i b r a t i o n
Te s t s
E x i t
(ON) key to confirm your
(ON) key to enable modification.
(DOWN) and (UP) keys it is possible to
(ON) key to confirm.
(ON) key again to return to
Select with
= Yes = No
Confirm with
Select with
= Feet = Metres
Confirm with
23
English
Rev. 07 – 2014