VMIN
IMAX
Sensor Name
Once the modification has been performed, press the
Using the
(DOWN) key go to the Exit option and press the
the setting menu. The same procedure must be used to return to the main page.
EVVA-M
Use the
(DOWN) and
change the minimum voltage alarm value
from a minimum of 10.0V to a maximum of
18.0V and confirm by pressing (ON)
Use the
(DOWN) and
to change the maximum current alarm
value from a minimum of 10A to a
maximum
of
200A
pressing (ON)
Selecting this item a keyboard appears on
the display with which it is possible to
assign a name to the sensor;
Servizi 1
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0
4 5 6 7 8 9
Use the
(DOWN) and
to scroll through the letters and press (ON)
to confirm the letter highlighted by the
small square.
The
<
symbol
backspace; it deletes the last character.
The x symbol appears without confirming
the name
the # symbol appears confirming the set
name
(ON) key to confirm.
(ON) key again to return to
25
English
(UP) buttons to
(UP) buttons
and
confirm
1 2 3
< x #
(UP) buttons
corresponds
to
the
Rev. 01 – 2019
by