Electrical Safety - PRO-POINT 8784720 Mode D'emploi

8784720
5.2 Do not weld, cut or heat lead, zinc, cadmium, mercury,
beryllium or similar metals without seeking professional
advice and inspection of the welding area's ventilation.
These metals produce extreme toxic fumes, which can
cause discomfort, illness and death.
5.3 Do not weld or cut near chlorinated solvents or in areas
that chlorinates solvents can enter. The heat or
ultraviolet light of the arc can separate chlorinated
hydrocarbons into a toxic gas (phosgene) that can
poison or suffocate the user or bystanders.

ELECTRICAL SAFETY

WARNING! Do not touch or handle a live tool with any part
of your body that is wet or damp. Wet skin reduces
resistance to electrical current, increasing the danger of a
serious or fatal shock.
WARNING! To reduce risk of electric shock, be certain that
the plug is connected to a properly grounded receptacle.
1. Disconnect the tool from the power supply before making
any adjustments, changing accessories, cleaning, servicing
or when storing. Such preventive safety measures reduce
the risk of starting the tool accidentally.
2. Protect yourself against electric shocks when working on
electrical equipment. Avoid body contact with grounded
surfaces. There is an increased chance of electrical shock if
your body is grounded.
2.1 Insulate yourself from the electrical current and ground
using dry insulating mats or covers big enough to
prevent physical contact with the workpiece or ground.
3. Do not expose the tool to rain, snow, frost or any other
damp or wet conditions. Water entering a tool will increase
the risk of electric shock.
10
220V SPOT WELDER
For technical questions call 1-800-665-8685
V1.0