PRO-POINT 8784720 Mode D'emploi page 2

8784720
220V SPOT WELDER
SPECIFICATIONS
Type
Voltage Rating
Current Rating
Output Current
Rating
Tong Length
Welding Capacity
Duty Cycle
Working Temperature
Working Humidity
Storage Temperature
Cord Length
INTRODUCTION
The 220V Spot Welder permits quick and accurate welds in
workpieces up to 3/16 in. thick. Able to weld uncoated mild,
galvanized or stainless steel sheet.
A qualified electrician must install the spot welder with a
240 volt 3-prong plug (sold separately).
2
220V SPOT WELDER
Spot Welder
220 to 240 V AC
16A
2.5 kVA @ 50% Duty Cycle (5 seconds ON
/ 5 seconds OFF)
6 in.
Up to a combined thickness of 3/16 in. mild
steel sheet or two pieces of 20 gauge
galvanized steels.
50% @ 2.5 kVA, based on ten seconds (unit
can weld for 5 seconds out of a 10 second
time interval).
14 to 104ºF (-10 to 40ºC)
Effective up to 50% humidity at 40ºC
Effective up to 90% humidity at 20ºC
-4 to 131 ºF (-20 to 55ºC)
6-1/4 ft
For technical questions call 1-800-665-8685
V1.0