Product Description; 3�1 General Description; 3�2 Components And Functional Elements; 3�3 Standard Delivery - Renfert Waxlectric I Traduction Du Mode D'emploi D'origine

3

Product Description

3.1 General Description
Please read the following operating instructions carefully and observe the information they con-
tain in order to ensure a long and trouble-free service life.
• An external transformer supplies the wax knife with 12 V power� As a user, this increases your safety
during your daily work with the Waxlectric�
• Using a programme key you can save up to 3 temperatures for each channel and quickly call them up
again�
• The defining feature of the Waxlectric is its heater which is located directly in the modelling tips. This
allows the tips to react more rapidly to temperature changes� The knife's thermal dynamics are marked-
ly improved by the highly heat conductive special alloy�
• The electric wax knife is extremely service friendly. The modelling tip surfaces are not finished and can
therefore be easily reground as required� Should the heater develop a fault, only the tip need be re-
placed�
The wax knife no. 2155-0112, Large Wax Knife (refer to "Accessories") may NOT be reground or
re-sharpened.
3.2 Components and Functional Elements
A ON / OFF switch
Left channel
B Saved temperature displayr
C 3-digit temperature display
D Temperature adjustment
E Programme key (P key)
J Control unit
K Handpiece (Waxlectric II only)�
L
Handpiece
M Transformer
B
C
L
D
E
3.3 Standard Delivery
1 Control unit with integrated holder for heating handle and tips
1 Handpiece (or 2 handpieces with the Waxlectric II)
1 Modelling insert, No� 2155-0102 (for Waxlectric I), or 2 inserts, No� 2155-0101 + 2155-0103
(for Waxlectric II)
1 Transformer
1 Instruction manual
A J
F
G
H
I
K
- 5 -
Right channel (Waxlectric II only)
F Saved temperature display
G 3- digit temperature display
H Temperature adjustment
I Programme key (P key)
EN
M