Product Description - Renfert MT3 Guide De Démarrage

Product Description

Component Groups and Functioning Elements
See Fig. 1 (on inside cover)
1 Hose clamp
2
ON / OFF-switch
5 Grinding table
6 Door latch (4x)
7
Mains plug
8 Drain hose
9 Water hose
11 Pull-off tool
12 Water connection
Standard Delivery
1 Trimmer
1 Water hose
1 Drain hose
1 Allen key, SW4
1 Pull-off tool
1 Marathon Trimmer Disc
1 Quick Start Guide
Installation
Unpacking
⇒ Check to ensure all delivery parts are complete (compare "Standard Delivery").
Setting Up
⇒ Place appliance on solid even working surface.
⇒ Place appliance close to a supply water connection and drain.
⇒ Place appliance with easy access to the mains plug socket.
Connection
⇒ Twist drain hose (8) onto connection fitting (13).
⇒ Fix with a hose clamp (1).
⇒ Place drain water hose with downward slope.
⇒ Connect water hose (9) to water connection (12).
⇒ Connect the water hose to a water supply with a shutoff tap.
⇒ Open the shutoff tap and check for leaks.
⇒ Unroll the power cable and insert the plug (7) into the socket.
13 Darin water connecting branch
14 Water inlet
15 Cover
16 Fastening screw
17 Lock pins
18 Rinse tube
21 Bracket
22 Allen key, SW4
23 Flange
- 3 -
en