Tools Required - R&G LP0187SS Mode D'emploi

LEGEND
ITEM 1 = LA0002 No. PLATE LIGHT inc SHROUD (x1).
ITEM 2 = LICENSE PLATE BRACKET (TB0187 Part 1) (x1).
ITEM 3 = BULLET CONNECTORS (CON0004) (x2).
ITEM 4 = 150mm LENGTH OF HEATSHRINK (x3).
ITEM 5 = RUBBER BUNGS (RB80-30-00) (x2).
ITEM 6 = No. PLATE ILLUMINATOR CONNECTOR (CON0014) (x1).
ITEM 7 = M6 x 16mm LONG BUTTON HEAD BOLTS (x2).
ITEM 8 = M6 WASHER (x2).
ITEM 9 = SPACERS (S0915 – 7.5mm LONG) (x2).
ITEM 10 = COVER (TB0187 Part 2) (x1).
ITEM 11 = 2.5mm CABLE TIES (x3).
ITEM 12 = SELF ADHESIVE CABLE CLIPS (x4).
ITEM 13 = REFLECTOR (x1).
ITEM 14 = M8 x 16mm LONG BUTTON HEAD BOLTS (x2).
ITEM 15 = M6 NYLOC NUTS (x2).
ITEM 16 = M5 x 12mm LONG BUTTON HEAD BOLT (x1).
ITEM 17 = SELF-ADHESIVE NEOPRENE FOAM (x3).
Please note that in cases where kits are packed with rubber washers holding the components onto
the bolt – the rubber washers should be thrown away!

Picture 1
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301

TOOLS REQUIRED

Set of metric Allen keys to include 3, 4, & 5mm A/F size.

6, & 10mm spanners or sockets.

Cable cutters.
MAXIMUM TORQUE SETTINGS

M4 Bolt = 8 Nm

M5 Bolt = 12 Nm

M6 Bolt = 15 Nm

M8 Bolt = 20 Nm
R&G Racing
www.rg-racing.com
Picture 2
Email: info@rg-racing.com