Swisscom Office 30 Mode D'emploi page 116

Using the extended-feature functions
Call back
You request a call back from an internal subscriber whose line is busy or who is not
answering.
Call–back
Note Only one call back can be activated at a time.
Call waiting
To alert a busy subscriber to your call by using the "Call_waiting" tone and an
appropriate display.
Note If the called party rejects your call, the connection will be disconnected.
Paging
To page a person directly or after trying to telephone him.
Page
MENU
8
All manuals and user guides at all-guides.com
Press the Foxkey under "Call_back"; you will
hear the confirmation tone. After replacing the
handset, you will see "Call expected" on the dis-
play and the number/name of the corresponding
Reset
subscriber. You can press the Foxkey under
"Reset" to cancel the requested call back.
C–wait
Press the Foxkey under "Call_waiting".
Press the MENU key repeatedly until "Page"
appears. Press the Foxkey at this position and
enter the number of the person sought.
Ok Confirm with "Ok".
20261949en_ba_h0