Menu Settings; Language; Water Hardness; Descale - Siemens EQ.7 Mode D'emploi

en de

Menu settings

j
button down for at least 3
Hold the
seconds.
The different setting options are now
displayed
S
ETTINGS
L
ANGUAGE
W
ATER HARDNESS
D
ESCALE
In the following operating instructions, each
new setting begins with
followed by an exact description.
The different setting options can be
<
selected with the
S
ETTINGS
W
ATER HARDNESS
D
ESCALE
C
LEAN
N.B.: The changes you have made are
saved automatically.
It is not necessary to confirm them
additionally.
30
SE_TK76_Teil_1_080917.indd 30
E
NGLISH
j >
3 sec. +
>
and buttons 4.
S
TART
j >
L
3 sec. +
ANGUAGE
Turn the knob 6 to select the required

language

j >
W
3 sec. +
ATER HARDNESS
Turn the knob 6 to select the required
1,2,3

water hardness

Note: It is important to set the water
hardness correctly, so that the appliance
indicates accurately when the descaling
programme should be run. The factory
setting for the water hardness is
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
Dip the test strip in the water briefly and
check the result after 1 minute.
Level Water hardness
German (°dH)
1 1-7
2 8-14
3 15-21
4 22-30
j >
D
3 sec. +
ESCALE
If you want to descale the appliance,
press the start button 8 and run the
descaling programme (see "Descaling").
j >
C
3 sec. +
LEAN
If you want to clean the appliance, press
the start button 8 and run the cleaning
programme (see "Cleaning").
j >
C ' 'C
3 sec. +
ALC N
If you want to descale and clean the
appliance, press the start button 8 and
run the Calc'n'Clean programme (see

"Calc'n'Clean").

4
or .
4
.
French (°fH)
1-13
14-25
26-38
39-54
LEAN
18.09.2008 08:40:47