Childproof Lock; Activating The Child-Proof Lock; Deactivating The Child-Proof Lock; Menu Settings - Siemens TI 903 Serie Mode D'emploi

en Childproof lock
If profiles are already saved and if
2.
the individual drink should be saved
in a new profile, use the rotary
selector to select a new profile.
- or -
If the individual drink should be
saved in an existing profile, use the
rotary selector to select the desired
profile.
Press the rotary selector to confirm
3.
the selection.
If a new profile is created, enter name
and select background picture. Confirm
the entries.
If a profile is already available, select
this and save the drink.
Press the ! button.
4.
The appliance is ready for use again.
To exit the menu automatically,
Note:
set "Leave profiles automatically" under
"User profiles". ~ "Menu settings"
on page 20
A

Childproof lock

The appliance can be locked to protect
C h i l d p r o o f l o c k
children against scalding and burns.

Activating the child-proof lock

Press and hold the milk button for at
least 4 seconds.
"Child-proof lock activated" appears in
the display.
It is no longer possible to operate the
appliance.
20
Deactivating the child-proof
lock
Press and hold the milk button for at
least 4 seconds.
"Child-proof lock deactivated" appears
in the display.
The appliance can be used in the usual
way.
Q

Menu settings

This menu is used for changing settings
M e n u s e t t i n g s
individually, accessing information and
starting a programme.

Changing settings

Press and hold the $/± button for at
1.
least 5 seconds to open the "Menu".
The different setting options will
appear in the display.
Make the desired setting using the
2.
rotary selector.
The current setting is highlighted in
colour on the display.
Press the navigation button under
3.
"select".
Use the rotary selector to change the
4.
setting.
Press the navigation button under
5.
"confirm".
The setting has been saved.
Press the $/± button to exit the
6.
"Menu".
The drink selection appears on the
display.
Notes
You can switch to the previous level
■
by pressing the navigation button
under "back".
The setting procedure can be
■
aborted by pressing the navigation
button under "abort".