Operation; Setting The Operating Mode - Renkforce 1494841 Notice D'emploi

11. Operation

a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slave mode, or as slave device via the controller of another effect light.
After switching on (putting the ON/OFF (1) switch in the ON position), the effect light will perform a reset.
Only after this process is completed will the device be ready.
Use the display (8) and ESC (9) and ENTER (11) buttons as well as the UP (10) and DOWN (13) buttons to set the
operating mode.
• Push the ENTER (11) button to get to the menu selection for the individual menu items.
• Move through the menu with the UP (10) and DOWN (13) buttons.
• Select menu items with the ENTER (11) button and change the values or options to be set with the UP (10) and
DOWN (13) buttons.
• Confirm the selection with the ENTER (11) button.
• To jump one level back in the menu or to call the last item selected again, push the button ESC (9).
Menu Overview
Menu Item Option
DMX Address 001-512
Run Mode DMX 13 Ch
DMX 48 Ch
Auto Run
Sound Control
Master Auto Run
Master Sound Control
Slave Run
Language Setting English
All manuals and user guides at all-guides.com
Function
Setting the DMX starting address
13-channel DMX operation
48-channel DMX operation
8 different automatic programs (Perform Mode1-8)
Sound-to-light mode
8 different automatic programs (Perform Mode1-8) in master-slave
operation (master device)
Sound-to-light mode in master-slave operation (master device)
Master-slave operation (slave device)
only English can be selected
33