Operation; Setting The Operating Mode - Renkforce RDM PAR-Spot 6 x 10 W Mode D'emploi

9. Operation

a) Setting the operating mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Ad-
ditionally, it can be used as a master device with integrated controller to control other connected effect
lights synchronously in master-slave operation, or as slave device via the controller of another effect light.
Use the LED display and function buttons ESC, UP, DOWN and ENTER to set the operating modes.
• Press UP or DOWN buttons repeatedly to select the desired function.
• Press the ENTER button to confirm your selection.
• Select the desired option with the UP and DOWN buttons.
• Press the ENTER button to confirm your selection.
• Select the desired option 2 (if present) with the UP and DOWN buttons.
• Confirm your selection again with ENTER.
• Select the desired option 3 (if present) with the UP and DOWN buttons.
• Confirm your selection again with ENTER.
To return to the main level in the menu, push the button ESC.
29