Operation; General Media Operation - Renkforce GM106 Notice D'emploi

11. Operation

a) General Media Operation
The effect light can be controlled with the integrated controller or with an external DMX controller. Additi-
onally, it can be used as a master device with integrated controller to control other connected effect lights
synchronously in master-slave operation, or as slave device via the controller of another effect light.
The settings are made in the menu via the display and the function buttons MODE/ESC (1), UP (2),
DOWN (3) and ENTER (4).
• Push the button MODE/ESC (1) to select menu items or to get one level back in the menu.
• Use the buttons „UP" (2) or „DOWN" (3) to select the desired menu item.
• Push ENTER (4) to confirm selection or to select a sub-item in the menu.
After a short time without a button being pushed, the display will be switched off. It can be activa-
ted again at any time by pushing any button.
Menu Overview
Display
d001
nASL / nAFA / nStS / nStc / SLAu
PAn / rPAn
tiL / rtiL
diS / rdiS
13CH / 5CH
PA54 / PA36 / PA18
ti27 / ti18 / ti 9
rESt
LoAd
Option
d001 - d512
Explanation
DMX address setting
Standalone mode
Reverse rotating direction
Reverse swivel direction
Setting display alignment
DMX operating mode
Limit rotating angle
Limit swivel angle
Reset
Loading Factory Setting
31