Operation; Setting The Operating Mode - Renkforce 1086303 Notice D'emploi

• Plug in the enclosed mains line to the mains connection POWER IN (1) and screw this connection on
carefully so that no moisture can escape.
• If you want to supply further LED bars with power, you can connect them to the connection POWER
OUT (5).
• Plug the mains plug of the mains line into a grounded socket.
• Once the device is connected to the mains socket, it takes up operation.

11. Operation

a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additi-
onally, it can be used as a master device with integrated controller to control other connected effect lights
synchronously in master-slave operation, or as slave device via the controller of another effect light.
The menu settings are made via the display and the function buttons MENU, r, s and ENTER.
• Push the button MENU to enter the main menu.
• Select the desired format with the buttons r and s and confirm your selection with the ENTER button.
• Push the ENTER button again to get to the option selection.
• Select the desired format with the buttons r and s and confirm the desired option with the ENTER
button.
• To go back one level in the menu, push the button MENU
The following page holds an overview of the menu functions.
30