Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.1
Slide a Blade through the Fan Motor Assembly Center
Blade Slot.
Mount the Blade to Fan Motor Assembly using Three
#8-32 x 11mm Washer Head Screws (supplied)
(Figure 1).
NOTE: Take care not to scratch Fan Motor
Assembly when installing Blades.
Complete the remaining Four Blades installation per the
above instructions.
A spare #8-32 x 11mm Washer Head Screw is supplied
in the loose parts bag, if needed.
WARNING
!
To reduce the risk of personal injury, do not bend
the blades during installation, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
3.2
Remove One of the Three #6-32 x 3/8" Pan Head
Screw with Lockwasher in the Fan Motor Assembly
and loosen the remaining Two #6-32 x 3/8" Pan Head
Screws with Lockwashers (Figure 2).
3. Ceiling Fan Assembly
#8-32 x 11mm WASHER
HEAD SCREWS
(3 per blade)
FAN BLADE
SLIDE FAN BLADE
INTO CENTER SLOT
CENTER
SLOT
FAN
HOUSING
Figure 1
REMOVE & RETAIN
ONE #6-32 x 3/8"
PAN HEAD SCREW
W/LOCKWASHER
FAN MOTOR
ASSEMBLY
Figure 2
5
LOOSEN TWO #6-32 x 3/8"
PAN HEAD SCREWS
W/LOCKWASHERS
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF235
Publicité
Table des Matières
