3.1
Orientate the Blade Support Plate and Fan Blade onto
the Fan Motor Hub, as shown in Figure 1 .
Mount the Fan Blade onto the Fan Motor Hub using Three
1/4-20 x 28 mm Pan Head Screws with Lockwashers
(supplied in ceiling fan parts bag) (Figure 1) .
Repeat for the remaining Two Fan Blades and Support
Plates .
To Secure the Three Blade Support Plates and the
Fan Blades to the Fan Motor Hub, Tighten all
1/4-20 x 28 mm Pan Head Screws with Lockwashers .
NOTE: Take care not to scratch the Fan Housing or
blades when installing the Fan Blades.
WARNING
!
To reduce the risk of personal injury, do not bend
the blades during installation, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
3. Ceiling Fan Assembly
1/4-20 x 28 mm
PAN HEAD SCREWS
w/LOCKWASHERS
(3 per blade)
BLADE SUPPORT
PLATES (3)
FAN
BLADES (3)
FAN MOTOR
HUB
Figure 1
5
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF315