Remote Control Procedures - Luminance Brands kathy ireland HOME ASTOR Serie Mode D'emploi

6.5
Place the Shade into the opening in the Lower Housing,
aligning the Three Flat Areas on the top edge of the
Shade with the Lower Housing Three Raised Dimples
and turn the Shade Clockwise until it stops (Figure 31).
NOTE: Periodically check that the Shade is seated
fully clockwise in the Lower Housing.
Please call Customer Service at 1-800-777-4440
if you have any questions about installation and
operation of this Ceiling Fan.
WARNING
!
Fan installation must be completed, including the
installation of the fan blades, before testing the remote
control.
7.1: Preset Memory Feature
Your Ceiling Fan consists of a Hand-Held Remote
Control Transmitter and a Receiver which is mounted
under the Fan Ceiling Cover.

7. Remote Control Procedures

REVERSE SWITCH
CLOCKWISE
FLAT AREAS (3)
Figure 31
Your Receiver is equipped with a preset memory
f e a t u r e . I f t h e A C s u p p l y t o t h e R e c e i v e r
is powered through a Wall Switch, when the Switch
is turned OFF, the Control will remember the Light
Intensity and Fan Speed.
When the Switch is turned back ON the Light and Fan
will resume operation as they were prior to the Switch
being turned OFF.
20
LOWER HOUSING
RAISED DIMPLES (3)
SHADE
ETL Model No.: CF235