Ceiling Fan Assembly - Luminance Brands KATHY IRELAND HOME LURAY ECO CF860BQ00 Mode D'emploi

3.1
Flip the upper foam pad over and place on a stable
working surface.
Remove the Fan Motor Assembly from the protective
plastic bag.
Place Fan Motor Assembly on top of the foam pad with
the Upper Motor Cover supporting the weight of the
Motor (Figure 1).
This will permit access for the Blades to be installed.
3.2
NOTE: The blades will have screws installed from
the top and bottom into the motor assembly.
Carefully place the first Blade onto the Motor Assembly
such that the large mounting Flange with Three Holes
aligns with the Three matching Holes of the Motor
(Figure 2). The Two bottom Blade Mounting Tabs should
align with the mating Mounting Ears on the other side of
the Motor.
Install Three Screws into the Blade Holes and loosely
fasten to the Motor with a Phillips tip Screwdriver.
Repeat this for each of the other Two Blades.
Be careful to align the edge of each Blade with the
edge(s) of the adjoining Blades to avoid scratching
the paint. Reposition the Blades as needed to form a
concentric circle with uniform gaps between the Blades.
After all Three Blades are installed and aligned,
completely tighten the Nine Screws. You may hear a
popping noise as the Blade edges mate together.
WARNING
!
To reduce the risk of personal injury, do not bend the
blade assemblies when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.

3. Ceiling Fan Assembly

Figure 1
BLADE LARGE
MOUNTING
FLANGE
BLADE
MOUNTING
TAB
Figure 2
5
FAN MOTOR
ASSEMBLY
UPPER MOTOR
COVER
WASHER HEAD SCREWS
(3 per blade)
MOTOR
ASSEMBLY
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF860
BLADE (3)