Ceiling Fan Assembly - Luminance Brands DORIAN ECO CF515BS00 Manuel Du Propriétaire

3.1
Remove One of the Three #6-32 x 3/8" Pan Head Screw
with Lockwasher from the Fan Motor Hub (Figure 1) .
Retain the #6-32 x 3/8" Pan Head Screw with
Lockwasher for future use .
Loosen the Two #6-32 x 3/8" Pan Head Screws with
Lockwashers (Figure 1) .
3.2
Place the 2-pin Fan Motor Assembly Connector and all
Wiring Connectors through the large center hole of the
Light Fixture Adapter (Figure 2) .
Position the Light Fixture Adapter Key Hole Slots onto
the Two loosened Screw Heads .
Rotate the Light Fixture Adapter Clockwise to engage
the Two Screws .
NOTE: Verify that the serrated washers are not
trapped between the Light Fixture Adapter and the
Fan Motor Hub.
Reinstall the previously removed #6-32 x 3/8" Pan Head
Screw with Lockwasher (Figure 2) .
Retighten all Three #6-32 x 3/8" Pan Head Screws
with Lockwashers to securely attach the Light Fixture
Adapter to the Fan Motor Hub (Figure 2) .
A spare #6-32 x 3/8" Pan Head Screw with Lockwasher
is in the hardware bag, if needed .
Carefully turn the partially assembled Ceiling Fan
right side up and position the Fan on the styrofoam in
preparation for additional assembly .
NOTE: The LED Light Fixture Shade will be
installed during the Final Assembly, after the
Ceiling Fan is Hung and Wired.

3. Ceiling Fan Assembly

Figure 1
Figure 2
5
REMOVE AND RETAIN
#6-32 x 3/8" PAN HEAD
SCREW WITH LOCKWASHER
FAN MOTOR
ASSEMBLY
LOOSEN #6-32 x 3/8"
PAN HEAD SCREWS
WITH LOCKWASHERS
(2)
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF515