Luminance Brands kathy ireland HOME ASTOR Serie Mode D'emploi page 23

7.6
The Light Push Button (
OFF and controls the Light Intensity (Figure 36).
To vary the Intensity of the Light, hold the Light Button
( ) down until the desired Light Intensity is reached,
then release the Button (Figure 36).
NOTE: When turning the light on, light will turn on
at the light intensity previously selected.
Your Remote Control has full control of your Fan and
Light.
The Power Indicator Light (blue glow) will Illuminate
while any Button is pressed, indicating that the Battery
is good.
) turns the Light ON and POWER INDICATOR
LIGHT
LIGHT BUTTON
Figure 36
Figure 37
COVER
WALL
BRACKET
SCREWS (2)
Figure 38
23
TO INSTALL BRACKET
TO WALL:
INSTALL THE TWO SCREWS
SLIDE THE COVER DOWN
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF235