Ceiling Fan Assembly - Luminance Brands Kathy Ireland 4th AVENUE LED CF766LBQ00 Mode D'emploi

3.1
Position the flange marked "THIS SIDE UP"on top of
the blade marked "THIS SIDE UP" (Figure 1) .
Place a Decorative Nut (supplied) through the
underside of the Fan Blade and attach the Blade
Flange to the Fan Blade using the #10-32 x 1/4"
Washer Head Screw (supplied) .
Use three #10-32 x 1/4" Washer Head Screws per
Blade Assembly (Figure 1) .
Repeat this procedure for the remaining two Blades,
Decorative Nuts, and Flanges .
3.3
NOTE: Take care not to scratch Fan Housing when
installing Fan Blades.
Rotate the Motor Hub so the notched area is above the
screw holes in the Motor Hub .
Install one Blade Assembly (with the markings: "THIS
SIDE UP", facing up) on the top of the Motor Assembly
using two 1/4-20 x 1/2" Pan Head Screws with
Lockwashers (supplied) (Figure 2) .
Repeat this procedure for the remaining two Blades
Assemblies .
WARNING
!
To reduce the risk of personal injury, do not bend
the blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
3.3
Remove the two Set Screws from the top of the Motor
Coupler (Figure 3) .
Retain the Set Screws for future use .

3. Ceiling Fan Assembly

THIS SIDE UP
DECORATIVE NUT
Figure 1
(3 per blade/flange)
MOTOR HUB
NOTCHED AREA
1/4-20 x 1/2" PAN HEAD
SCREW WITH
LOCKWASHER (2 per
blade/flange assembly)
T H I S S I D E U P
BLADE/FLANGE
ASSEMBLY (3)
Figure 2
SET
SCREWS (2)
Figure 3
Please contact 1-800-777-4440 for further assistance
5
#10-32 x 1/4" WASHER HEAD
SCREW (3 per blade/flange)
THIS SIDE U P
"THIS SIDE UP"
LABEL
FLANGE (3)
"THIS SIDE UP"
LABEL
CEILING FAN
BLADE (3)
T H I S S I D E U P
MOTOR
COUPLER
luminancebrands.com
ETL Model No.: CF766L