Ceiling Fan Assembly - Luminance Brands kathy ireland HOME CARRERA GRANDE ECO Mode D'emploi

3.1
Rotate the Motor Hub to align the Hub Notch area over
each of the Five Screws which is holding the Shipping
Retainer to the Motor Assembly .
One by one, unscrew each Screw and Discard Screw
and Shipping Retainer (Figure 1) .
3.2
Verify that the Flange Gaskets are preinstalled onto the
end of each of the Blade Flanges (Figure 2) .
A spare Flange Gasket is supplied in the loose parts
bag, if required .
3.3
Mount Flanges (supplied with fan) to the Blades (sold
separately) using Four #10-24 x 12mm Washer Head
Blade Screws and Four 16mm Flat Washers (supplied
with fan) (Figure 3) .
NOTE: Some accessory blades available are
supplied with shorter screws. These shorter screws
MUST be used to assemble the blades to flanges.

3. Ceiling Fan Assembly

MOTOR HUB
REMOVE SHIPPING
RETAINER
BY REMOVING 5
SCREWS
Figure 1
BLADE FLANGE
FLANGE GASKET
Figure 2
#10-24 x 12mm WASHER
HEAD BLADE SCREW
(4 per blade/flange)
FLANGE
Figure 3
Please contact 1-800-777-4440 for further assistance
5
16mm FLAT WASHER
(4 per blade/flange)
BLADE
luminancebrands.com
ETL Model No.: CF788