Rear Suspension; Tire Pressure; Headlight Beam Adjustment - Suzuki LT-F160K4 Manuel D'assemblage

1
1
2
3
4
5

REAR SUSPENSION

Checking spring setting
Make sure the spring setting of the rear suspension is
correct.
The standard setting for this vehicle is as indicated in
the table below.
Standard setting
A: Adjuster

TIRE PRESSURE

Using an accurate air gauge, check the air pressure
of the front and rear tires. The pressure should be as
shown.
COLD INFLATION TIRE PRESSURE
LOAD
FRONT
UP TO 25 kPa
130 kg 0.25 kgf/cm
285 lbs 3.6 psi

HEADLIGHT BEAM ADJUSTMENT

The headlight beam can be adjusted vertically if nec-
essary.
To adjust the beam vertically:
Loosen the headlight housing fitting bolts and move
the headlight housing up or down as required.
Tighten the bolts.
A: Bolt
41
Position 2
TIRE PRESSURE
REAR
20 kPa
2 2
0.20 kgf/cm
2.9 psi