Suzuki LT-F160K4 Manuel D'assemblage page 18

FRONT CENTER FENDER
Install the front center fender.
A: Front center fender
B: Hook
C: Slit
D: 5 × 12 mm tapping screw (with washer)
FUEL TANK VENT HOSE
Insert the free end of fuel tank vent hose to the hole
of tank cover.
NOTE:
Be sure not to bend or twist the hose when
installing.
A: Fuel tank vent hose
B: Hole
Remove the bolt to take off the footrest holding
bracket.
NOTE:
The brackets and bolts are no longer needed
and may be discarded.
A: Bolt
B: Bracket
C: Footrest
1. Lift the front of vehicle by using a hoist.
2. Raise the rear of vehicle.
3. Pull the crate base forward.
17