Suzuki LT-F160K4 Manuel D'assemblage page 22

Tighten the wheel set nuts to the specified torque.
" " Wheel set nut: 26 N·m (2.6 kgf-m) " "
A: Wheel set nut (8 mm flange nut)
MUD GUARD
Install the mud guard to the front fender as shown in
the photograph.
A: Mud guard
B: 6 × 12 mm screw (with washer)
C: 6 mm spacer nut
D: Front fender
E: Mud guard bracket
Fix the mud guard to the vehicle as shown in the fig-
ures.
A: Mud guard
B: Front fender
C: 5 × 12 mm tapping screw (with washer)
D: Mud guard bracket
E: Frame
F: 6 × 12 mm bolt (with lock washer)
G: Stepped washer OD: 22.0 mm ID: 6.5 mm
SHIPPING TIE-DOWN BAR
Remove the shipping tie-down bar by holding the rear
of vehicle down.
A: Shipping tie-down bar
21