Product Information; Product Description; Equipment Characteristics - Maico PP 60 KA Instructions De Montage Et Mode D'emploi

Ventilation levels in dehumidification
operating mode
The ventilation level for the
dehumidification operating mode
depends on the level previously
selected on the room air control.
For example, if the heat recovery
operating mode was set with
ventilation level 3 before the
dehumidification operating mode
was selected, the dehumidification
operating mode also runs in
ventilation level 3.

5. Product information

5.1 Product description

The PushPull 60 K is a single-room
ventilation unit with heat recovery. The
ventilation unit is installed directly in the
room that is to be ventilated (no costly
installation of a duct system necessary).
The PushPull 60 K switches from exhaust
air mode to supply air mode every 70
seconds. Supply air is heated using heat
recovered from the exhaust air flow.
During this process, more than 80 % of the
exhaust air heat is recovered.
The RLS PP-K room air control can control
up to six PushPull 60 K. The room air
control is not included in the scope of
delivery.
5.2 Models
● PP 60 KA: Comfort version with
stainless steel external cover.
● PP 60 KL: Comfort version with stainless
steel / aluminium soffit element.
5. Product information | gb

5.3 Equipment characteristics

● PP 60 K ventilation unit with five
ventilation levels with heat recovery.
● Ceramic heat exchanger providing
more than 80 % of heat.
● Simultaneous supply and exhaust air
operation possible. Unit switches from
exhaust air mode to supply air mode
every 70 seconds.
● Cross-ventilation operating mode
without heat recovery: there are always
two ventilation units running in supply air
/ exhaust air mode.
● Ventilation levels can be selected with
RLS PP-K room air control.
● Low energy consumption.
● Internal cover made from plastic, white
(similar to RAL 9016).
● External cover made from stainless steel
(PP 60 KA) or with soffit element made
from stainless steel / aluminium
(PP 60 KL)
● With air filter of filter class G3 for filtering
the outside and exhaust air. The M6 fine
dust filter can be ordered as an option.
● The ventilation unit is practically
maintenance-free. The filter simply has
to be cleaned every 2-3 months and the
air filter replaced based on the filter
change display.
● The ventilation system requires no
adjustment.
● Simple installation of the complete fan
unit by insertion into the wall sleeve.
● Fan with energy-saving, quiet EC motor,
suitable for continuous operation.
● Electrically actuated shutter prevents
cold air from flowing in.
● Pluggable terminal block for the power
connection.
29