Using The System - Luvion SUPREME CONNECT 2 Manual D'instructions

34
Wall mounted Ceiling mounted
3. Connect the power adapter to the baby unit and a power socket.
4. Slide the power switch to turn the camera on.
The parent unit will display the video of the baby unit, when both are switched on and within range of each
other. The message "Out of range" will be displayed on the screen of the parent unit when the baby unit is
outside the range of the parent unit or when the baby unit is not switched on or recognized.
LUVION
Premium Baby products

USING THE SYSTEM

The video of the baby unit will be displayed
on the screen of the parent unit when both
are switched on. The icons on the screen are
explained below.
8
1. Signal indicator
The signal
indicator shows the strength of the
connection between units. no bars
indicate a poor signal and 4 bars
indicate the strongest signal (see table).
2. Clock Displays the time that is set
on the monitor
3. Channel indicator The channel
indicator displays the current channel.
4. Remote monitoring Indicates
remote monitoring status. When
remote monitoring is turned on (in
white), that means the camera App is
accessed remotely, if not then the
is in grey.
5. Zoom indicator Indicates that the video
from the baby unit is zoomed in 1x, 1.5x or 2x.
6. Monitor Speaker Mute
Indicates the monitor's speaker is muted
7. Battery indicator
Indicates the battery level of the parent unit.
The battery level indicator within will show the level of charge in fi ve states:
Low battery: Flashing Red
¼ Battery: Red
½ Battery: White, 1 bar
¾ Battery: White, 2 bars
Full Battery: White, 4 bars (the power supply is not connected)
When the power supply is connected the lightning bolt icon is displayed.
8. Temperature indicator
Displays the temperature measured by the baby unit.
9. Feed time counter
Shows countdown clock counting back till the feed time.
10. Night Light On/O Indicates the night light is on/off . Turn the night light on/off from the monitor.
11. Quad Mode Press this button to switch to quad mode. When two cameras are paired, it will be split
mode (two displays). You can't listen to the audio from the cameras in quad or split mode.
4 5
1 2 3
11
Signal strength Indicator Warning
Perfect None
Good None
Fair None
Low Out of Range
No Signal Out of Range
35
6 7
9
10
12