Set The Alarm; Vox Sensitivity - Luvion ICON DELUXE Manuel D'instructions

LUVION
2.
Use the , buttons to set the temperature above which the temperature alarm for a
room that is too hot will be activated when
3.
Use the , , buttons to set the temperature at which the temperature alarm for a
room that is too cold is activated if
NOTE: the default setting for a too high temperature is 36˚C, the default setting for a too
low temperature is 8˚C. If the temperature exceeds these values, the temperature alarm icon
is displayed on the screen and the user is alerted with beeps. Press a button on the monitor
to stop the beeping and blinking.
4.3 Lullabies
The camera can play 4 diff erent lullabies.
1.
Press the menu / Ok button
Fig. 2)
2.
Use the , , , buttons to select the lullabies icon
3.
Press the menu / Ok button
buttons to select one of the 4 available lullabies, you can choose between 1 song play,
loop (play all 4 songs continuously)
4.
Press the menu / Ok button
NOTE: The default setting is lullabies off .
4.4

Set the alarm

You can use the alarm to remind yourself that it is time for feeding, changing diapers,
sleeping etc.
1.
Press the menu / Ok button
Fig. 2)
2.
Use the , , , buttons to select the alarm icon
3.
Press the menu / Ok button
to set the timer for the alarm.
4.
Press the menu / Ok button
5.
Press the
NOTE: The minimum time is 0.5 hours, the maximum time is 5 hours (7 levels)
NOTE: If an alarm is set, the alarm icon
NOTE: The default setting is alarm off .
NOTE: Press a button on the monitor to turn off the alarm if it goes off .
NOTE: If you do not stop the alarm by pressing a button on the monitor, it will go off for 1 minute
and then go off again for 1 minute after 3 minutes. In total, the alarm will sound 3 times before it
stops.
4.5

VOX Sensitivity

In this submenu you can set the sensitivity of the VOX function (sound activation). If no
sound is detected by the camera for 30 seconds, the monitor goes into sleep mode, the
screen and the sound will turn off . As soon as the camera detects sound that is louder
than the set sensitivity level, the monitor automatically switches on again, the image
and sound are switched on again. Follow the instructions below to change the VOX
level.
1.
Press the menu / Ok button
Fig. 2)
2.
Use the , , , buttons to select the VOX icon
3.
Press the menu / Ok button
Premium Baby products
on the monitor to display the menu on the screen. (see
to open the lullabies submennu. Use the , , ,
to confi rm.
on the monitor to display the menu on the screen. (see
to open the alarm submenu. Use the , , , buttons
to confi rm.
button to exit the menu.
on the monitor to display the menu on the screen. (see
to open the VOX submenu. Use the
(red) is selected.
(green) is selected.
in the menu.
, or turn off lullabies
in the menu.
will be displayed on the screen.
in the menu.
21
, buttons to
NL