Luvion SUPREME CONNECT 2 Manual D'instructions page 19

36
12. 'Talk'-indicator Press and hold this button if you want to talk to camera side, release to get monitor
audio back.
Note:
a) "Talk Back" button only appears in single camera Live View mode
b) If the camera unit was playing a lullaby, the lullaby will be paused until the talk back button is released
c) The camera speaker volume setting is same as lullaby play level (select
When using the touch screen the view on
the right will be displayed on your screen.
13. Menu Here you can change multiple
monitor and camera settings.
14. Navigation Controls Use the arrow
icons to remotely Pan/Tilt the camera.
15. Monitor Volume adjust the
monitor volume up '+' & down '-' .
16. Zoom In / Out supports x1, x1.5, x2 digital zoom ratio.
17. Lullaby Press the Lullaby icon to turn lullabies ON/OFF. Plays 3 pre-programmed songs. Choose 1
specifi c song or "All" above the , 1 2 3 or 'all' will be displayed. You can choose one specifi c lullaby
you want to play or have all 3 lullabies play subsequently, from 1 to 2 to 3 and back to 1 again.
Inside the monitor's menu you'll
see the screen on the right.
18. Back
Save the settings and return
to previous page.
19. Brightness You can adjust the
brightness of each individual camera.
20. Pair / Unpair Camera You can
connect up to 4 cameras to your
system.
21. VOX Set the VOX sensitivity to
detect low or high sound levels.
22. Temperature You can set Celsius or Fahrenheit, and set temperature alert high and low limit.
23. Date & Time & Timer Set up the system date & time & feed timer.
24. Camera & Alarm Volume You can adjust the camera and alarm volume.
> > ).
13 14 15 15 16
18 19 20 21 22 23 24 25
25. Language Setting language for the monitor, six options: English, German, French, Italian,
Netherlands and Spanish
26. Default Reset the monitor back to its factory settings.
27. Home Return to Live View.
OUT OF RANGE WARNING
When the baby unit is positioned too far away
from the parent unit, the warning message "Out
of Range" will appear on the screen of the parent
unit and the video will start to fl icker. When
there is no connection between the baby and
the parent unit, the screen of the parent unit will
be black and display the warning message "Out
of Range".
To improve the range of the baby monitor, move
the antenna of the baby monitor upwards.
17
N : If moving the baby and parent unit
OTE
closer together does not help, try re-pairing
the baby and parent unit. see Pairing chapter.
26 27
LUVION
Premium Baby products
OUT OF RANGE
37