Telephone/Tablet Setup - Luvion SUPREME CONNECT 2 Manual D'instructions

42
Choose one of the available camera channels to pair
5
the new camera.
A countdown will be displayed on the screen.
Briefl y press the baby unit (camera) PAIR
6
button on the bottom of the camera to pair
the baby unit (camera) to the parent unit
(monitor).
The video from the camera should now be
displayed on screen.

TELEPHONE/TABLET SETUP

Follow the steps below to set up your camera for remote access through your home router. After setting up
the connection you can connect to your camera from anywhere through the SmartBabyCam app for Android
and iOS. You can use the remote app access while simultaniously monitoring the baby through the 5" moni-
tor!
IOS AND ANDROID INSTALLATION
PLEASE PRESS
PAIR KEY 1
ON CAMERA SIDE
12
2
3
LUVION
Premium Baby products
To ensure the best possible connection to the router during the setup process please turn off the
monitor.
Download and install the SmartBabyCam app for iOS
or Android.
Turn on the camera, press and hold "reset" button until
the camera fl ashes 3 times.
After around 5 seconds short press the reset button,
the camera night light will change to fast fl ash.
After about 30 seconds, short push the reset button
again, the night light will change to slow fl ash.
Go to your phone settings\Wireless & Networks\
WLAN, fi nd the SSID(WiFi name) with the name
xxxxx111A and connect to the SSID
43