Firmware Update - Luvion SUPREME CONNECT 2 Manual D'instructions

46
FIRMWARE UPDATE IOS FOR ANDROID SEE NEXT PAGE
Below the instructions for updating the fi rmware for iOS, android is very similar but for the exact android
instructions see the next page.
We recommend updating your Su-
preme Connect 2 camera's fi rmware
whenever a new version is available.
To update the fi rmware go to the live
1
view page (the camera should be on-
line) and touch the menu icon at
the right corner and select "Firmware
Update".
Press OK, to start updating the fi rm-
2
ware If there is new fi rmware avail-
able. Make sure you keep the camera
connected to the internet during the
fi rmware installation process.
When the new fi rmware is installed
the message "OTA update is over,
please check if the device is function-
3
ing normally" will be displayed.
Press Ok. Please check if everything
is functioning properly, your baby
monitor is now ready to use.
LUVION
Premium Baby products
FIRMWARE UPDATE ANDROID FOR IOS SEE PREVIOUS PAGE
Below the instructions for updating the fi rmware for android, iOS is very similar but for the exact iOS instruc-
tions see the previous page
We recommend updating your Su-
preme Connect 2 camera's fi rmware
whenever a new version is available.
1
To update the fi rmware go to the live
view page (the camera should be on-
line) and touch the menu icon at
the right corner and select "Firmware
Update".
Press OK, to start updating the fi rm-
2
ware If there is new fi rmware avail-
able. Make sure you keep the camera
connected to the internet during the
fi rmware installation process.
When the new fi rmware is installed
the message "OTA update is over,
please check if the device is function-
3
ing normally" will be displayed.
Press Ok. Please check if everything
is functioning properly, your baby
monitor is now ready to use.
47
OTA update is over, please check if
the device is functioning normally! the device is functioning normally!