Installation Warnings; Installation Of The Camera - Luvion PLATINUM Manuel De L'utilisateur

Before you install the camera, carefully plan where and how it will be positioned, and where
you will route the cable that connects the camera to the power adaptor . Before starting per-
manent installation, verify its performance by observing the image on the receiver when
camera is positioned in the same location/position where it will be permanently installed
and the receiver is placed in the location where it will be used most of the time.

Installation Warnings:

Aim the camera(s) to best optimize the viewing area: Select a location for the
EN
camera that provides a clear view of the area you want to monitor , which is free
from dust, and is not in line-of-sight to a strong light source or direct sunlight.
Avoid installing the cameras with thick walls, or obstructions between the cameras
and the receiver .

Installation of the camera

1 Carefully unpack the camera.
NOTE: If you are installing cameras that did not come with the system, please
see the camera pairing section of this manual for details on installation.
2 Mount the camera to the wall. Mark the position of the screw holes on the wall,
and drill holes and insert 2 screws, then firmly attach the camera to the wall by
placing the stand over the installed screws and pushing the base downwards.
NOTE: The camera can also be placed on a flat surface, such as a table or
shelf, and no mounting hardware is required.
3 Adjust the viewing angle of the camera.
24
platinum user manual ALL .indd 24
All manuals and user guides at all-guides.com
Camera installation
Position the base holes over the
screws. Slide the base down to
lock the base in place.
4-11-2009 17:17:41