Temperature Scale Display Setting; Using The Luvion Grand Elite 2 Monitor; Set Up; Pan And Tilt - Luvion GRAND ELITE 2 Manuel D'instructions

GRAND ELITE 2
14

3.6 TEMPERATURE SCALE DISPLAY SETTING

The temperature reading from the temperature sensor at the back of the Camera Unit
will be displayed on the top of the screen. To toggle between C and F:
1. Press and hold the SHORT-CUT button for more than 3 seconds.
2. Check that the temperature display reading on the screen has changed to your
desired scale. If not, repeat step 1.

4. USING THE LUVION GRAND ELITE 2 MONITOR

4.1 SET UP

Place the Camera Unit in a convenient location (e.g. on a table or a shelf ) and point the
camera lens toward the area you want to monitor.
NOTE
Do not place the Monitor Unit within baby's reach. If there is interference with the
picture or sound, try moving the units to di erent locations, and ensure they are not
close to other electrical equipment.
EN

4.2 PAN AND TILT

The Camera Unit can be remotely controlled from the Monitor Unit.
1. Press
2. Press the

4.3 NIGHT VISION MODE

The Camera Unit has 8 high-intensity infrared LEDs for picking up clear images in the
dark. When the built-in photo sensor detects a low level of ambient light, the LEDs
will automatically activate and the screen on the Monitor Unit will display in black and
white. The
Premium Babymonitor
UP button or DOWN button to tilt upward or downward.
LEFT button or
icon will be displayed on the screen.
RIGHT button to pan left or right.