Luvion SUPREME CONNECT 2 Manual D'instructions page 23

44
STEP 4 6 IOS FOR ANDROID SEE NEXT PAGE
Below the fi nal 3 steps for iOS, android is very similar but for the exact android instructions see the next
page
Open the
SmartBabyCam App,
press "+" to add de-
vice and scan the QR
code at the bottom of
the camera. The UID
4
will be automatically
recognized. You'll
only need to enter
a camera name of
your choice and the
default password:
000000 and press
save to confi rm.
You will now return to the start screen and
see the camera is online. When you fi rst try
to access the camera it will make you change
the standard password into a secure personal
5
password. (The new password should contain
at least 6 characters, with at least one up-
percase letter, one lowercase letter, one digit
and one special character (choose from:
~`@#$%^*()_-+=|{}[].?/).
After changing the password, press the Edit
Device icon , fi nd the"WiFi Setting": Enter
your WiFi network SSID (you can only connect
the camera to 2.4GHz WiFi networks) and
6
enter it's password and press send.
The night light will now change to solid on,
once you see the night light fl ash 3 times and
then turn off , the set up succeeded. Please
turn off the app and turn it on again, then
you can remote access your camera from a
smartphone anywhere.
LUVION
Premium Baby products
STEP 4 6 ANDROID FOR IOS SEE PREVIOUS PAGE
Below the fi nal 3 steps for android, iOS is very similar but for the exact iOS instructions see the previous
page
Open the SmartBabyCam App, press 'add
device' and press 'scan' to scan the QR code
4
at the bottom of the camera for the UID to
automatically be recognized. Set the camera
name to anything of your choice and enter
the default password: 000000 and confi rm.
You will now return to the start screen and
see the camera is online. When you fi rst try
to access the camera it will make you change
the standard password into a secure personal
5
password. (The new password should contain
at least 6 characters, with at least one up-
percase letter, one lowercase letter, one digit
and one special character (choose from:
~`@#$%^*()_-+=|{}[].?/).
After changing the password, press the Edit
Device icon , fi nd the"WiFi Setting": Select
your WiFi network SSID (you can only connect
the camera to 2.4GHz WiFi networks) and
6
input it's password and press send.
The night light will now change to solid on,
once you see the night light fl ash 3 times and
then turn off , the set up succeeded. Please
turn off the app and turn it on again, then
you can remote access your camera from a
smartphone anywhere.
45