Bottom View; Getting Started - Luvion SUPREME CONNECT 2 Manual D'instructions

32
10
11
BOTTOM VIEW
10. Pairing button Establishes a new connection between the baby and parent unit during the pairing
process. Pairing should be used when installing an additional camera or when the monitor does not
recognize the baby unit. Consult page xx for more information on the pairing process.
11. Mounting frame connectors Connects the baby unit to the included mounting frame, which can be
attached to a wall or ceiling.
12. Reset button Press this button to reset the camera or change camera mode.

GETTING STARTED

INSTALLING THE PARENT UNIT MONITOR
12 1. Carefully unpack the parent unit (monitor).
2. Connect the power adapter to the parent unit and power socket. The parent unit will start charging;
the indication LED will now light up (red). This LED will turn green when the parent unit is fully charged.
During fi rst use, please allow the unit to completely charge to ensure optimal battery capacity.
NOTE
3. Press and hold the on/off button. The screen will now show the Luvion introduction screen.
INSTALLING THE BABY UNIT CAMERA
Before you install the baby unit (camera), carefully plan where and how you want to position it. Make sure
that you take in account the length of the power cable and the position of the power socket, because the
baby unit (camera) always needs to be connected to the power grid.
1. Carefully unpack the baby unit (camera).
2. Place the baby unit in the preferred position. You can place the baby unit on a table/cabinet, or you can
mount it on a wall or ceiling. You can use the mounting frame to mount the camera on a wall or ceiling.
With the provided plugs and screws.
LUVION
Premium Baby products
: C
HARGE THE PARENT UNIT COMPLETELY BEFORE FIRST USE
: Before permanently installing the baby unit (camera), make sure that the wireless connection
NOTE
between the baby unit and parent unit is su cient. Verify this when both the parent unit and baby unit are
placed in the positions from which you would like to use them.
: Avoid installing the baby unit near walls or other obstruction between the baby and parent unit. For a
NOTE
good sound sensitivity and image it is recommended to place the baby unit between a 1,5-3m distance .
.
LUVION
33