Dolmar TM-98.14 H2D Manuel D'utilisation page 127

Masquer les pouces Voir aussi pour TM-98.14 H2D:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

HOW TO USE THE MACHINE
To ...
End mowing (☛ 5.4.6)
Stop the engine (☛ 5.4.7)
Store the machine (☛ 5.4.8)
5.5 USING ON SLOPING GROUND
Only mow on slopes with gradients up to
the maximum already mentioned (max
10° - 17%). Lawns on a slope have to be
mowed moving up and down and never
across them, taking great care when
changing direction that the highest
wheels do not hit obstacles (such as
stones, branches, roots, etc.) that may
cause the machine to slide sideways, tip
over or otherwise cause loss of control.
DANGER!
!
ON SLOPES, and always engage the parking brake before leaving the
machine stopped and unattended.
WARNING!
!
ing ground to prevent the risk of tipping up.
Reduce the forward speed before going on a slope, particularly downhill.
DANGER!
!
Control of the machine may be lost, particularly on slippery surfaces.
For mechanical drive models:
DANGER!
!
You will need to ...
Disengage the blades and reduce the engine speed.
Reduce the engine speed, wait a few seconds, turn the
key and close the fuel stopcock.
Engage the parking brake, remove the key and, if neces-
sary, wash the machine and the inside of the cutting
deck.
REDUCE SPEED BEFORE ANY CHANGE OF DIRECTION
Take care when beginning forward movement on slop-
Never use reverse to reduce speed going downhill.
Never ride the machine on slopes in neutral gear or
max 10° (17%)
EN 29
RIGHT!

Publicité

Table des Matières
loading

Table des Matières