Dolmar TM-98.14 H2D Manuel D'utilisation page 113

Masquer les pouces Voir aussi pour TM-98.14 H2D:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CONTROLS AND INSTRUMENTS
ment or disengagement, as this
can cause overheating and dam-
age the transmission belt.
NOTE
machine is in movement, keep
your foot off the pedal.
4.22 S
PEED CHANGE LEVER
This lever has seven positions for
the 5 forward speeds, the neutral
position «N», and reverse «R».
To go from one speed to another,
press the pedal (4.21) half way and
move the lever as per the indica-
tions on the label.
WARNING!
!
stopped.
For hydrostatic drive models:
4.31 B
RAKE PEDAL
This pedal works the brake on the
rear wheels.
4.32 D
RIVE ENGAGEMENT PEDAL
This pedal engages drive in the
wheels as well as modulating the
machine's forward and reverse
speeds.
– To engage forward drive just
press it in the «F» direction with
When the
Reverse must only be engaged when the machine is
4.21
4.22
N
1 2 3
R
4.31
4.32
N
R
EN 15
4
5
F

Publicité

Table des Matières
loading

Table des Matières