Dolmar TM-98.14 H2D Manuel D'utilisation page 116

EN 18
– stopping the engine if even just one of the safety requirements is lacking.
a) To start the engine it will be necessary that:
– the transmission is in "neutral";
– the blades are not engaged;
– the operator is seated or the parking brake is engaged.
b) The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in "neutral";
– the operator leaves his seat with the transmission in "neutral" but without
engaging the parking brake;
– the parking brake is engaged without disengaging the blades.
The table below shows various operating conditions, highlighting why the safety
device shuts down the engine.
O
PERATOR
A) WHEN STARTING (Key in «START» position)
Uninfluential
Uninfluential
Absent
B) WHEN CUTTING (Key in «ON» position)
Absent
Absent
Absent
Sitting
B T
LADES
Disengaged
Engaged
Disengaged
Engaged
Disengaged
Disengaged
Engaged
RANSMISSION
1....5 - F/R
«N»
«N»
Uninfluential
1....5 - F/R
«N»
Ininfluential
HOW TO USE THE MACHINE
B
RAKE
Engaged Does NOT start
Engaged Does NOT start
Disengaged Does NOT start
Engaged
Disengaged
Disengaged
Engaged
E
NGINE
Stops
Stops
Stops
Stops