Dolmar TM-98.14 H2D Manuel D'utilisation page 134

EN 36
6.2.3 E
NGINE
Follow all the instructions in the engine
manual.
To empty the engine oil, unscrew the oil
plug (1). When refitting the plug, make
sure the seal is positioned correctly.
6.2.4 R
EAR AXLE
This is a sealed single unit that does not require maintenance. It is permanently
lubricated and this lubricant does not need changing or topping up.
6.2.5 B
ATTERY
To ensure long life to the battery it is essential to keep it carefully maintained.
The machine battery must always be charged:
– before using the machine for the first time after purchase;
– before leaving the machine for a prolonged period of disuse;
– before starting up the machine after a prolonged period of disuse.
– Carefully read and observe the recharging procedure described in the booklet
provided with the battery. Failure in following the procedure or in charging the
battery could permanently damage the battery elements.
– A flat battery must be recharged as
soon as possible.
IMPORTANT
done using a battery charger at constant
voltage. Other recharging systems can
irreversibly damage the battery.
The machine comes with a connector (1)
for recharging, to be connected to the cor-
Recharging must be
MAINTENANCE
1
1