Publicité
Les langues disponibles
Les langues disponibles
CONTROLS & FEATURES
Eco Throttle Switch
The Eco Throttle system automatically reduces engine speed when loads are
turned off or disconnected. When appliances are turned on or reconnected, the
engine returns to the proper speed to power the electrical load.
Each time you push the Eco Throttle Switch, the system turns on and off.
If high electrical loads are connected simultaneously, push the Eco Throttle
system to the OFF to reduce voltage changes.
Eco Throttle system ON
Eco Throttle system OFF Indicator lights off
OVERLOAD RESET:
If the power generation stops due to overload and the overload alarm indicator
is blinking, overload reset is available. After removing the cause of the overload,
power generation can be resumed by pressing and holding the Eco Throttle
switch (for more than 3 seconds).
24
Indicator lights on (green)
• Recommended to minimize fuel consumption and
further reduce noise levels when less than a full
load is applied to the generator.
• The Eco Throttle system does not operate.
ECO THROTTLE INDICATOR
ECO THROTTLE
SWITCH
Publicité
