Güde GBS 200 Mode D'emploi Original page 8

GB
Please read carefully the following Operating Instructions before putting the machine into operation.
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Pictures just for illustration purposes! This document is the original Operating Instructions.
Marking
Product safety:
Product corresponds to
appropriate EU standards
Commands:
Keep the Operating
Instructions
Protective gloves to be used!
Prohibitions:
Warning against hand injury
No pulling the cable
Warning:
Warning against dangerous
voltage
Warning against flying items
Environment protection:
Dispose waste professionally
so as not to harm the
environment.
Any defective and/or disposed
electric or electronic
appliances must be delivered
to appropriate collection
centres.
Interseroh
TÜV Rheinland
Proven safety
Use protective glasses and
headphones!
Protect against wet and
moisture
Keep safe distance
Packing cardboard material
may be delivered to
collection centres for
recycling.
Protect against moisture
Caution - fragile
This side up
Technical specifications:
Connection
Engine speed
Bandsaw blade length
Weight
Supply includes
Please check whether the following parts are included:
- 1 machine table
- 1 mitre stop
- 1 parallel stop
- 1 standard bandsaw blade
- 1 table insert
- 1 Allen key
- 1 flat key
- 4 lock ring screws
- 1 countersunk head and washer screw
- 1 Operating Instructions
The band saw should be mounted to a massive work
station or work-table if possible. For that, use holes in the
machine legs.
Check the parameters of your electrical network with those
given on the machine. The voltage and frequency should
be identical, not exceeding 240 V/60 Hz.
Warranty
The warranty exclusively applies to material or
manufacturing defects. The original proof of purchase with
the purchase date must be submitted when lodging a claim
in the warranty period.
The warranty does not include any unauthorised use, e.g.
machine overloading, violent use, damage by a third party
or foreign item. The failure to follow the Operating
Instructions and assembly instructions and common wear
and tear are not covered by the warranty, either.
8
Engine output
Bandsaw blade pulley
diameter
Table size