Using A Memory Card; Recording On The Memory Card - Panasonic Palmcorder MultiCam PV-VM202 Mode D'emploi

5
6
ACCESS
CARD EJECT
1
2
A
1
3
4
F 7 640
2
STILL MPEG4 VOICE
TAPE
1
CARD
W.B./SHUTTER/IRIS/
3, 4
MF/VOL/JOG
2
PUSH
3
5

Using a Memory Card

A Card can be used to record files or play back files.
≥Use genuine SD Memory Card or MultiMediaCard only.
ª Inserting a Memory Card
Before inserting a Memory Card, be sure to turn off the Palmcorder.
1
While holding the Memory Card with its cut off corner
facing right
≥The display of the Card Slot changes from
Ejecting a Card
After turning the Palmcorder off, slide the [CARD EJECT] Lever
ª [ACCESS] Lamp
While the Palmcorder is accessing the Card (reading, recording, playback,
erasing, moving of images), the [ACCESS] Lamp
≥While the [ACCESS] Lamp is on, never attempt to: pull out the Card, turn
off the Palmcorder power, or switch the [TAPE/CARD] Selector. Such
actions will damage the Card and cause the Palmcorder to malfunction.
~~~~~~~~~~~~~~~~~~~~~~~~~

Recording on the Memory Card

Three kinds of data can be recorded by selecting with the
[STILL/MPEG4/VOICE] Selector. When recording still pictures, select [STILL]
(Card PhotoShot), when recording moving pictures, select [MPEG4]
(MPEG4 Recording), when recording voice, select [VOICE]
(Voice Recorder Function).
≥If the [TAPE/CARD] Selector is set to [CARD], the Palmcorder is
automatically turned off when you leave it for about 5 minutes without
performing any PhotoShot recording.
≥When the [TAPE/CARD] Selector is set to [CARD], you cannot record to the
Tape.
ª Card PhotoShot
CARD
MODE
Still pictures can be recorded on the Memory Card from the Palmcorder lens
as well as from scenes that have already been recorded on a cassette.
The size of images that are recorded using this Palmcorder is approximately
1,080,000 pixels. Recording of images with a size that is larger than a million
pixels is called mega-pixel still-picture recording. Compared to images of
normal recording, images that are created by mega-pixel still-picture
1 recording can be printed more clearly.
Recording from the Palmcorder Lens (Camera Mode)
1
Slide the [TAPE/CARD] Selector to [CARD].
BACKLIGHT
2
Slide the [STILL/MPEG4/VOICE] Selector to [STILL].
3
CAMERA Set [CAMERA FUNCTIONS] >> [CARD SETUP] >>
STILL
[PICTURE SIZE] >> [1200k k k k 900] or [640k k k k 480].
4
Set the [PICTURE QUALITY] to desired picture quality.
PHOTO
SHOT
5
Press the [PHOTO SHOT] Button.
≥The [
PICTURE
≥Mega-pixel recording (when you select [1200t900] in step 3) is useful for
taking clear pictures, but the following functions are disabled during mega-
pixel recording.
≥Digital zooming (l 22)
≥Digital Electronic Image stabilizer function (l 22)
≥Digital Effect functions (l 26, 27)
≥Title In/Creation (l 42)
≥The power is automatically turned off after about 5 minutes when a card has
been inserted.
1
, insert it into the Card Slot
] Indication will light in red.
A
2
.
3 4
to .
5
to the left.
6
lights up.
35