Assembling The Juice Extractor - Breville The Juice & Blend BJB840XL Livret D'instructions

pAGe heAdeR.....

ASSemBLING The JUICe eXTRACTOR

ASSemBLING The JUICe
eXTRACTOR
Before using the Juice Extractor for the
first time, remove and safely discard any
packaging material and promotional labels.
Ensure the power cord is unplugged from
the wall outlet.
Wipe the Motor Base with a damp cloth.
Dry thoroughly.
Wash the Filter Bowl Surround, Filter Basket,
Juicer Cover, Food Pusher, Juice Jug, Juice
Jug Lid and Pulp Container in warm soapy
water with a soft cloth or nylon brush. Rinse
and dry thoroughly. Alternatively, place
these parts, excluding the Food Pusher, in
the dishwasher.
1. Place the Motor Base on a flat dry
surface such as a bench top. Ensure
the power cord is unplugged from the
wall outlet.
2. Place the Filter Bowl Surround on top
of the Motor Base.
3. Align the arrows on the Filter Basket
with the arrows on the Motor Drive
Coupling and push down until it clicks
into place. Ensure the Filter Basket is
fitted securely inside the Filter Bowl
Surround and onto the Motor Base.
4. Lower the Juicer Cover, positioning the
rim within the Filter Bowl Surround.
11