Overload Protection; Overheat Protection - Breville The Juice & Blend BJB840XL Livret D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OpeRATING The JUICe eXTRACTOR
The Breville Juice & Blend is fitted with
protection devices as a safety precaution to
prevent both personal injury and damage to
the appliance.

OveRLOAd pROTeCTION

This protection device safeguards against
overloading the motor with excessive loads.
If overloading occurs, the Overload
Protection will automatically de-activate
the motor. When this occurs, unplug the
power cord from the wall outlet and press
the OVERLOAD RESET button found on the
underside of the Motor Base. This will reset
the Overload Protection, enabling you to
reconnect the power cord to the wall outlet
and recommence normal use.

OveRheAT pROTeCTION

This protection device safeguards
against overheating of the motor with
excessive loads.
If overheating occurs, the START | OFF
button surround will flash red and the
Overheat Protection will automatically
de-activate the motor. When this occurs,
unplug the power cord from the wall outlet
and allow the appliance to cool for at least 15
minutes. Then reconnect the power cord to
the wall outlet and recommence normal use.
16
eLeCTRONIC pROTeCTION
This protection device will automatically
de-activate the motor if the motor is stalled.
If the motor stalls, the START | OFF button
surround will flash red and the Electronic
Protection will automatically de-activate
the motor. When this occurs, unplug the
power cord from the wall outlet and clear the
Feed Chute. Either too much food is being
processed at one time or the pieces are not
small enough. Try trimming food, cutting
food into smaller pieces of even size and/
or processing a smaller amount per batch.
Then reconnect the power cord to the wall
outlet and recommence normal use.

Publicité

Table des Matières
loading

Table des Matières