Extract all the remaining pulp in the juicing
bowl before stopping the juicer.
For easier clean up, operate the juicer for an
additional 30 seconds after the juice is
extracted. Then fill the juicing bowl with water
and run the juicer before opening the drum
lid.
When the drum lid is stuck, press the
REVERSE – OFF – FORWARD button in
this order, switching back and forth 2 to 3
times to dislodge. Then place both hands on
the drum lid and firmly press down while
simultaneously turning the drum lid to open.
CLEANING THE JUICER
1. Switch OFF and unplug the power
cord from the wall outlet.
2. Turn the drum lid counter clockwise
to open.
WARNING
When moving the appliance, do not lift
by grabbing the feeding tube. Always lift
the appliance by grabbing the motor
body or handle.
3. Turn the top-set counter clockwise and
lift off the motor body.
4. Remove the juicing screw, strainer and
rotation wiper unit from the juicing bowl.
Clean with provided brush.
NOTE
Immediately clean the juicer after each use. If
remaining residue in the juicer dries up, it can
make disassembling and clean-up difficult.
The excess build up can cause poor
performance in future uses.
For easier disassembly, place the top-set in
the sink and run the water through from the
top of the top-set.
50