ASSemBLING The BLeNdeR
3.
Insert the Blade Assembly into the
Blender Jug base (see Fig. 1) and turn
clockwise until securely locked into
position. Keep rotating until tight,
ensuring the aligning arrow symbol
is within the 'SEAL' graphic (Fig. 2). This
will ensure a tight seal.
NOTe
The Blade Assembly can be tightened by
hand or with the provided Blade Removal
Tool. Turn clockwise.
5.
With the Blender Jug handle to the left,
place the Blender Jug on top of the
Motor Base.
32
6.
Raise the Safety Locking Arm and lock
into the two grooves on either side of
the Blender Jug base. The Safety
Locking Arm should now be in a
vertical position.
7.
Place the Lid firmly into position on top
of the Blender Jug and insert the Inner
Lid by turning clockwise until securely
Fig. 1
locked into position.
Fig. 2