Assembling Your Breville Juice Fountain - Breville Juice Fountain Plus JE95XL Manuel

BR8085 JE95XL_Book_AMEND 28/8/07 1:47 PM

Assembling your Breville Juice Fountain

Step 1
Place filter bowl surround on top of the motor base.
1
Step 2
Align the arrows on the filter basket with the arrows on
the motor drive coupling and push down until it clicks
into place. Ensure the stainless steel filter basket is
fitted securely inside the filter bowl surround and onto
the motor base.
2
8
Page 8
Step 3
Place the juicer cover over the filter bowl surround,
positioning the feed chute over the stainless steel
filter basket and lower into position.
3
Step 4
Raise the safety locking arm up and locate into
the two grooves on either side of the juice cover.
The safety locking arm should now be in a
vertical position and locked into place on top
of the juicer cover.
4A
4B
Step 5
Slide the food pusher down the feed chute by
aligning the groove in the food pusher with the small
protrusion on the inside of the top of the feed tube.
Continue to slide the food pusher down the feed chute.
5A
FOOD PUSHER
GROVE
SMALL
PROTRUSION
INSIDE FEED
TUBE
5B
9