Assembling your Breville Juice Fountain
Step 1
Place filter bowl surround on top of the
motor base.
1
Step 2
Sit the Stainless Steel Filter Basket inside the Filter
Bowl Surround.
Before switching the juicer on ensure the
stainless steel filter basket is pushed down
firmly until it clicks into place.
Note
8
2B
Step 3
Place the juicer cover over the filter bowl surround,
positioning the feed chute over the stainless steel
filter basket and lower into position.
3
Step 4
Raise the Safety Locking Arm up into the vertical
operating position. (Please see 4A.)
4A
Next locate the Locking Arm into the two grooves
on either side of the Juice Cover. (Please see 4B.)
4B
Step 5
Slide the Food Pusher down the Feed chute by
aligning the groove in the Food Pusher with the small
protusion on the inside of the top of the Feed Tube.
(Please see 5A.)
5A
FOOD PUSHER
GROOVE
SMALL
PROTRUSION
INSIDE FEED TUBE
Continue to slide the food pusher down the feed
chute. (Please see 5B.)
5B
9